Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T02:45:40.340Z Has data issue: false hasContentIssue false

Shape-memory NiTi–Nb foams

Published online by Cambridge University Press:  31 January 2011

Ampika Bansiddhi*
Affiliation:
Department of Materials Engineering, Kasetsart University, Bangkok 10900, Thailand
David C. Dunand
Affiliation:
Department of Materials Science and Engineering, Northwestern University, Evanston, Illinois 60208
*
a) Address all correspondence to this author. e-mail: ampikaa@gmail.com
Get access

Abstract

A new powder metallurgy technique for creating porous NiTi is demonstrated, combining liquid phase sintering of prealloyed NiTi powders by Nb additions and pore creation by NaCl space-holders. The resulting foams exhibit well-densified NiTi–Nb walls surrounding interconnected pores created by the space-holder, with controlled fraction, size, and shape. Only small amounts of Nb (3 at.%) are needed to produce a eutectic liquid that considerably improves the otherwise poor densification of NiTi powders. NiTi–Nb foams with 34–44% porosity exhibit high compressive failure stress (>1,500 MPa), ductile behavior (>50% compressive strain), low stiffness (10–20 GPa), and large shape-memory recovery strains. These thermomechanical properties, together with the known biocompatibility of the alloy, make these open-cell foams attractive for bone implant applications.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable