Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T22:37:32.116Z Has data issue: false hasContentIssue false

Silver-copper oxide based reactive air braze for joining yttria-stabilized zirconia

Published online by Cambridge University Press:  01 March 2005

J.Y. Kim
Affiliation:
Pacific Northwest National Laboratory, Richland, Washington 99352
J.S. Hardy
Affiliation:
Pacific Northwest National Laboratory, Richland, Washington 99352
K.S. Weil
Affiliation:
Pacific Northwest National Laboratory, Richland, Washington 99352
Get access

Abstract

We investigated a new method of ceramic-to-metal joining, referred to as reactive air brazing, as a potential method of sealing ceramic components in high-temperature electrochemical devices. Sessile drop wetting experiments and joint strength testing were conducted using yttria stabilized zirconia (YSZ) substrates and CuO–Ag-based air brazes. Results from our studies indicate that the wettability of the braze improves substantially with increasing CuO content, over a compositional range of 1–8 mol% CuO, which is accompanied by an increase in the bend strength of the corresponding brazed YSZ joint. The addition of a small amount of TiO2 (0.5 mol%) to the CuO–Ag braze further improves wettability due to the formation of a titanium zirconate reaction product along the braze/substrate interface. However, with one notable exception, the bend strength of these ternary braze joints remained nearly identical to those measured in comparable binary braze joints. Scanning electron microscopy analysis conducted on the corresponding fracture surfaces indicated that in the binary braze joints, failure occurs primarily at the braze/YSZ interface. Similarly in the case of the ternary, TiO2-doped brazes joint failure occurs predominantly along the interface between the braze filler metal and the underlying titanium zirconate reaction layer.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable