Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T23:27:48.717Z Has data issue: false hasContentIssue false

Simplified Area Function for Sharp Indenter Tips in Depth-sensing Indentation

Published online by Cambridge University Press:  31 January 2011

Jeremy Thurn
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Robert F. Cook
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Get access

Extract

A two-parameter “area function” characterizing the depth-dependent projected area of an indenter was introduced and applied to a Berkovich tip. The two parameters have physical meaning, corresponding to the effective tip radius and effective cone angle. The indenter tip was calibrated on a commercial load-controlled Nano Indentert® XP (MTS Systems Corp., Eden Prairie, MN). All calibrations were carried out using the procedure of Oliver and Pharr [J. Mater. Res. 7, 1564 (1992)] using several homogeneous materials. Plane-strain modulus and hardness values deconvoluted from indentation load–displacement traces using the calibrated two-parameter area function compared well with the values determined using the empirical eight-parameter area function of Oliver and Pharr.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable