Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T10:33:52.764Z Has data issue: false hasContentIssue false

Simulation of nacre with TiN/Pt multilayers and a study of their hardness

Published online by Cambridge University Press:  31 January 2011

J. L. He
Affiliation:
Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
W. Z. Li
Affiliation:
Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
H. D. Li
Affiliation:
Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
Get access

Abstract

TiN/Pt multilayers with individual thicknesses between 1 and 8 nm were prepared by ion beam sputtering deposition to simulate the micro-laminated architecture of nacre. Multilayer hardness and the laminated structure were investigated. It was found that sharp but incoherent interfaces were formed between individual layers. The multilayer hardness had strong dependence on layer arrangement. The range of layer thickness appropriate for high hardness was experimentally determined. Hardness enhancement of 30–70% was generally observed. With the layer thickness properly adjusted, the multilayer can even be harder than the hard component (TiN). Annealing experiments indicated that the hardness enhancement was an intrinsic property of the TiN/Pt multilayers.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable