Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T03:53:28.262Z Has data issue: false hasContentIssue false

Stress gradients observed in Cu thin films induced by capping layers

Published online by Cambridge University Press:  31 January 2011

Conal E. Murray*
Affiliation:
IBM T.J. Watson Research Center, Yorktown Heights, New York 10598
Paul R. Besser*
Affiliation:
Advanced Micro Devices, Sunnyvale, California 94088
Christian Witt
Affiliation:
GlobalFoundries, T.J. Watson Research Center, Yorktown Heights, New York 10598
Jean L. Jordan-Sweet
Affiliation:
IBM T.J. Watson Research Center, Yorktown Heights, New York 10598
*
a)Address all correspondence to this author. e-mail: conal@us.ibm.com
b)Present address: Unity Semiconductor, Sunnyvale, CA.
Get access

Abstract

Glancing-incidence x-ray diffraction (GIXRD) has been applied to the investigation of depth-dependent stress distributions within electroplated Cu films due to overlying capping layers. Cu films, 0.65 μm thick, plated on conventional barrier and seed layers received a chemical vapor deposited (CVD) SiCxNyHz cap, an electrolessly deposited CoWP layer, or a CoWP layer followed by a SiCxNyHz cap. GIXRD and conventional x-ray diffraction measurements revealed that strain gradients were created in Cu films possessing a SiCxNyHz cap, where a greater in-plane tensile stress of approximately 180 MPa was generated near the film/cap interface as a result of constraint imposed by the SiCxNyHz layer during cooling from the cap deposition temperature. Although Cu films possessing a CoWP cap without a SiCxNyHz layer did not exhibit depth-dependent stress distributions, subsequent annealing introduced stress gradients and increased the bulk Cu stress. However, a thermal excursion to liquid-nitrogen temperatures significantly reduced tensile stresses in the Cu films.

Information

Type
Outstanding Symposium Papers
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable