Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T03:57:39.030Z Has data issue: false hasContentIssue false

Stress Relaxation of a Patterned Microstructure on a Diaphragm

Published online by Cambridge University Press:  31 January 2011

D. W. Zheng
Affiliation:
Department of Materials Science and Engineering, University of California at Los Angeles,Los Angeles, California 90095–1595
X. H. Wang
Affiliation:
Manifold Engineering, City of Industry, California 91748
K. Shyu
Affiliation:
Manifold Engineering, City of Industry, California 91748
C. Chen
Affiliation:
Department of Materials Science and Engineering, University of California at Los Angeles, Los Angeles, California 90095–1595
C-T. Chang
Affiliation:
Manifold Engineering, City of Industry, California 91748
K. N. Tu
Affiliation:
Department of Materials Science and Engineering, University of California at Los Angeles, Los Angeles, California 90095–1595
A. K. Mal
Affiliation:
Department of Mechanical and Aerospace Engineering, University of California at Los Angeles, Los Angeles, California 90095–1595
Y. F. Guo
Affiliation:
Advanced Interconnect and System Laboratory (AISL), Semiconductor Product Sector (SPS), Motorola Corp., Tempe, Arizona 85204
Get access

Abstract

Stress relaxation of a patterned thin film on diaphragms of different material and thickness was investigated through experimental study and numerical simulation. The diaphragm deflections, caused by relaxation of the residual stress in a patterned thin film residing on top, were measured using a Twyman–Green laser interferometer. The first diaphragm used was a Si3N4(top)/SiO2/Si composite diaphragm and the second a 0.5-μm-thick Si3N4 membrane. Custom-written simulation software, which uses a novel numerical algorithm named Nonlinear Sequential Analysis (N-LISA), was utilized to calculate the stress distribution in the patterned thin film and the diaphragm substrate. Agreement between the model and the experimental results was satisfactory. Simulation of the system balance between a tensile-stressed circular Ti film and a stress-free Si substrate of different thickness clearly shows a transition in the substrate behavior from a pure plate to a pure membrane. Interestingly, the deflection of the Si substrate caused by the residual stress in the Ti film reaches its maximum at a certain substrate thickness where plate and membrane characteristics coexist. This study addresses some basic mechanics issues involved in modern devices dealing with thin diaphragms.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable