Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T23:40:00.068Z Has data issue: false hasContentIssue false

Study of copper on graphite with titanium or chromium bond layer

Published online by Cambridge University Press:  03 March 2011

Phillip B. Abel
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Andras L. Korenyi-Both
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Frank S. Honecy
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Stephen V. Pepper
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Get access

Abstract

Improvement of copper to graphite adhesion by thin interfacial films of titanium and chromium was investigated. Graphite fibers and highly oriented pyrolytic graphite flats were sputter-coated first with 10 nm of titanium or chromium and then with 50 nm of copper. After annealing to 970 °C in argon/5%-hydrogen at atmospheric pressure for 5 min, copper without an interfacial bond layer agglomerated into nearly spherical particles, copper with the chromium bond layer agglomerated into particles with a contact angle less than 90°, indicating improvement in adhesion, and copper with the titanium bond layer exhibited a continuous metal film. In the latter case, most of the interfacial titanium was observed to have migrated into the copper and to the free surface, where the titanium reacted with contaminants in the annealing ambient.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable