Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T18:07:03.508Z Has data issue: false hasContentIssue false

Thermodynamic description of the Cu–Sn system

Published online by Cambridge University Press:  31 January 2011

Wojcieh Gierlotka
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-Chu 300, Taiwan; and Non-Ferrous Metals Department, Akademia Górniczo-Hutnicza (AGH) University of Science and Technology, Mickiewicza 30, 30-059 Krakow, Poland
Sinn-wen Chen*
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-Chu 300, Taiwan
Shih-kang Lin
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-Chu 300, Taiwan
*
a)Address all correspondence to this author. e-mail: swchen@che.nthu.edu.tw
Get access

Abstract

The Cu–Sn binary system is important for various applications, especially for recent developments in the electronics packaging industry. The ϵ-Cu3Sn and η-Cu6Sn5 (η′ phases) phases are frequently encountered in electronics products. However, the two phases have been described as line compounds in previous thermodynamic modeling, and their compositional homogeneities were not considered. In this study, the thermodynamic properties of the Cu–Sn binary system are modeled and the phase diagram is calculated by the CALPHAD method, using experimental information reported in the literature. The ϵ and η (η′) phases are described using compound energy models with two and three sublattices, respectively, so that their compositional homogeneities could be calculated. Good agreement was observed between the calculated result and the existing experimental data.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable