Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T19:14:23.040Z Has data issue: false hasContentIssue false

Titania and silica powders produced in a counterflow diffusion flame

Published online by Cambridge University Press:  31 January 2011

Aaron J. Rulison
Affiliation:
Department of Chemical Engineering, The Johns Hopkins University, Baltimore, Maryland 21218
Philippe F. Miquel
Affiliation:
Department of Chemical Engineering, The Johns Hopkins University, Baltimore, Maryland 21218
Joseph L. Katz*
Affiliation:
Department of Chemical Engineering, The Johns Hopkins University, Baltimore, Maryland 21218
*
c) Author to whom correspondence should be addressed.

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Earlier publications describe the counterflow diffusion flame burner and its unique capability to produce oxide particles having certain structures, such as spheres of one material coated with another, spheres of one composition with attached bulbs of another composition, and uniform multicomponent mixtures. Here we describe the production and properties of bulk quantities of powders produced using this burner. Measurements were made of specific surface area and, for titania, of phase composition. It was found that the controls over powder characteristics used in other forms of flame-synthesis are equally effective in the counterflow diffusion flame burner. We found that the specific surface area of both silica and titania powders decrease with increasing precursor concentrations. Transmission electron microscopy analysis of the titania powders indicates that the mean size of the particles that comprise these powders increases with increasing concentration. These trends are consistent with the collision-coalescence theory of particle growth. In addition, the crystalline phase of titania can be controlled by selecting the appropriate feed stream. For example, over the ranges TiCl4 precursor concentrations tested, feeding it only into the oxidizer stream yields mainly anatase TiO2 powders, while feeding only into the fuel stream yields mainly rutile TiO2 powders. These trends can be explained by the known atmosphere-dependent anatase-rutile transformation. The present data demonstrate that, in addition to its unique capability to produce certain particle shapes and morphologies, the counterflow diffusion flame burner can be manipulated to produce either of the major commercial titania phases, and also silica, with a wide range of specific surface areas.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1996