Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T12:24:14.336Z Has data issue: false hasContentIssue false

Ultrahigh strength Al-based amorphous alloys containing Sc

Published online by Cambridge University Press:  03 March 2011

Akihisa Inoue
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-Ku,Sendai 980-8577, Japan
Shintaro Sobu
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-Ku,Sendai 980-8577, Japan
Dmitri V. Louzguine*
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-Ku,Sendai 980-8577, Japan
Hisamichi Kimura
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-Ku,Sendai 980-8577, Japan
Kenichiro Sasamori
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-Ku,Sendai 980-8577, Japan
*
a)Address all correspondence to this author. e-mail: dml@imr.eduFamily name can also be spelled Luzgin
Get access

Abstract

Amorphous metallic alloys possess high strength characteristics, which are superior to crystalline materials. Here we report an influence of Sc addition on glass-forming ability, glass-transition behavior, supercooled liquid region, and mechanical properties of an Al84Y9Ni5Co2 glassy alloy. This paper also aims to present a promising (Al0.84Y0.09Ni0.05Co0.02)95Sc5 amorphous alloy. This alloy has an ultrahigh tensile fracture strength exceeding 1500 MPa, which surpasses those for all the other Al-based fully crystalline and amorphous alloys reported to date, in addition to high Young’s modulus of 78 GPa. The fracture surface of this new alloy exhibited vein pattern typical for amorphous alloys with good ductility, and multiple shear bandswere observed on the lateral surface. The ultrahigh tensile strength of the (Al0.84Y0.09Ni0.05Co0.02)95Sc5 amorphous alloy results from an increase in the interatomic constraint force by the addition of Sc, an element having highly negative enthalpy of mixing with Al, Ni, and Co and the highest chemical affinity with Al among the alloying elements.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable