Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T17:41:19.312Z Has data issue: false hasContentIssue false

UV-resistant hydrophobic rutile titania aerogels synthesized through a nonalkoxide ambient pressure drying process

Published online by Cambridge University Press:  29 August 2012

Wei Wei
Affiliation:
School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China
Jimin Xie*
Affiliation:
School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China
Yinyin Wu
Affiliation:
School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China
Jianjun Zhu
Affiliation:
School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China
Xiaomeng Lü
Affiliation:
School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China
Zaoxue Yan
Affiliation:
School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China
*
a)Address all correspondence to this author. e-mail: xiejm391@sohu.com

Abstract

The hydrophobic rutile titania aerogels were successfully prepared by nonalkoxide ambient pressure drying through a modification process. The resulted materials were characterized by x-ray diffraction, scanning electronic microscope, transmission electron microscope, contact angle analyzer, Brunauer–Emmett–Teller specific surface area, and ultraviolet (UV)–visible diffuse reflection spectrum. The experimental results demonstrated that the as-prepared samples nanoparticles with rutile crystalline structure were uniformly distributed. The UV-resistant hydrophobic samples having high surface area were used as photocatalysts for dye degradation reaction.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2012
Figure 0

FIG. 1.Process flowchart for titania aerogel preparation.

Figure 1

TABLE I.Numbers of moles of participating reactants for titania aerogel preparation.

Figure 2

FIG. 2.XRD patterns of titania aerogels.

Figure 3

FIG. 3.SEM and TEM images of titania aerogels.

Figure 4

FIG. 4.Isotherm and pore distribution curves of titania aerogels.

Figure 5

FIG. 5.UV–vis diffuse reflection spectra of the prepared titania aerogel. The inset is band gap evaluation from the plots of (αhν)2 versus hν.

Figure 6

FIG. 6.Photocatalytic degradation of Rh B aqueous solution using titania aerogel (A, under irradiation; B, without light irradiation).

Figure 7

FIG. 7.Evolution of water contact angle on titania aerogels under irradiation.

Figure 8

FIG. 8.Scheme of the photodecolorization of Rh B on titania aerogels under irradiation.