Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T01:00:40.220Z Has data issue: false hasContentIssue false

Whisker growth from an electroplated zinc coating

Published online by Cambridge University Press:  31 January 2011

Alongheng Baated*
Affiliation:
Graduate School of Engineering, Osaka University, Ibaraki, Osaka 567-0047, Japan
Keun-Soo Kim
Affiliation:
Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567-0047, Japan
Katsuaki Suganuma
Affiliation:
Institute of Scientific and Industrial Research, Osaka University, Ibaraki, Osaka 567-0047, Japan
*
a)Address all correspondence to this author. e-mail: aroohan@eco.sanken.osaka-u.ac.jp
Get access

Abstract

The formation of Zn whiskers threatens the reliable operation of electronic equipment with an electrical shorting hazard. As with tin whiskers (much more intensively researched than Zn whiskers), the mechanism of formation is still not clear. This work investigated the Zn whisker growth mechanism for an electroplated Zn coating above a carbon steel substrate from a raised floor tile. Iron–zinc (Fe–Zn) intermetallic and Zn oxides were identified by x-ray diffraction analysis (XRD) and electron probe microanalysis (EPMA). Fe–Zn intermetallic compounds formed on the surface of the Zn layer in addition to the interface between the Zn coating and the steel substrate. Zn oxides formed primarily on the surface of the Zn coating. Fe–Zn intermetallic compounds and Zn oxide formation can be the source of a residual stress that promotes Zn diffusion to the surface of electroplated Zn coating, resulting in the formation of Zn whiskers.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable