Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T00:11:08.231Z Has data issue: false hasContentIssue false

All Speed and High-Resolution Scheme Applied to Three-Dimensional Multi-Block Complex Flowfield System

Published online by Cambridge University Press:  05 May 2011

Uzu- Kuei Hsu*
Affiliation:
Department of Aircraft Maintenance and Repair, Air Force Institute of Technology, Kaohsiung, Taiwan 820, R. O. C.
Chang- Hsien Tai*
Affiliation:
Department of Vehicles Engineering, National Pingtung University of Science and Technology, Neipu Shiang, Pingtung, Taiwan 912, R.O.C.
Chien- Hsiung Tsai*
Affiliation:
Department of Vehicles Engineering, National Pingtung University of Science and Technology, Neipu Shiang, Pingtung, Taiwan 912, R.O.C.
*
* Professor
** Research Assistant
** Research Assistant
Get access

Abstract

The improved numerical approach is implemented with preconditioned Navier-Stokes solver on arbitrary three-dimensional (3-D) structured multi-block complex flowfield. With the successful application of time-derivative preconditioning, present hybrid finite volume solver is performed to obtain the steady state solutions in compressible and incompressible flows. This solver which combined the adjective upwind splitting method (AUSM) family of low-diffusion flux-splitting scheme with an optimally smoothing multistage scheme and the time-derivative preconditioning is used to solve both the compressible and incompressible Euler and Navier-Stokes equations. In addition, a smoothing procedure is used to provide a mechanism for controlling the numerical implementation to avoid the instability at stagnation and sonic region. The effects of preconditioning on accuracy and convergence to the steady state of the numerical solutions are presented. There are two validation cases and three complex cases simulated as shown in this study. The numerical results obtained for inviscid and viscous two-dimensional flows over a NACA0012 airfoil at free stream Mach number ranging from 0.1 to 1.0E-7 indicates that efficient computations of flows with very low Mach numbers are now possible, without losing accuracy. And it is effectively to simulate 3-D complex flow phenomenon from compressible flow to incompressible by using the advanced numerical methods.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable