Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T06:06:27.299Z Has data issue: false hasContentIssue false

Depth Measurement of Surface-Breaking Cracks Using Point-Source/Point-Receiver Acoustic Transducer

Published online by Cambridge University Press:  05 May 2011

Yung-Chun Lee*
Affiliation:
Department of Mechanical Engineering, National Cheng Kung University, Tainan, Taiwan 70101, R.O.C.
Shi Hoa Kuo*
Affiliation:
Department of Mechanical Engineering, National Cheng Kung University, Tainan, Taiwan 70101, R.O.C.
*
*Professor
**Graduate student
Get access

Abstract

A newly developed point-source/point-receiver (PS/PR) acoustic transducer is used for measuring the depth of surface-breaking cracks. The transducer consists of two miniature conical PZT elements which form a transmitter/receiver pair for generating and detecting surface waves. A tone-burst measurement system operates the PS/PR transducer at a fixed frequency. When a surface-breaking crack is present in between the transmitter and receiver, the change in time-of-flight of surface wave propagation caused by the crack is measured and used to estimate the crack depth. To verify the feasibility of this method, machined slots on a carbon steel sample are tested by the PS/PR transducer for crack depth determination. Good experimental results are obtained. Future applications and improvements on the PS/PR transducer system are addressed.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable