Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T11:45:58.815Z Has data issue: false hasContentIssue false

A Non-Iterative Direct Displacement-Based Design Procedure for SDOF Steel Columns: Using Substitute Structure

Published online by Cambridge University Press:  05 May 2011

Y.-Y. Lin*
Affiliation:
Department of Civil Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C.
K.-C. Chang*
Affiliation:
Department of Civil Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C.
*
* Research Associate
** Professor
Get access

Abstract

Traditionally, the yield displacement of a nonlinear structure was calculated by using the direct displacement-based seismic design method which usually requires a repeatedly iterative procedure no matter whether the substitute structure or inelastic design spectra has been adopted in the procedure. This will sometimes result in inefficiency if too many iterative cycles need to be produced in a design case for convergency. To avoid this disadvantage, this paper presents a non-iterative direct displacement-based design procedure for SDOF steel columns using the substitute structure approach. By combining the yielding property with the stiffness property of the designed steel columns, the procedure can immediately obtain the column's cross-section via the chosen target displacement and ductility ratio.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable