Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T12:53:53.259Z Has data issue: false hasContentIssue false

Numerical Study of Inlet and Geometry Effects on Discharge Coefficients for Liquid Jet Emanating From a Plain-Orifice Atomizer

Published online by Cambridge University Press:  05 May 2011

Chun-Lang Yeh*
Affiliation:
Department of Aeronautical Engineering, National Huwei Institute of Technology, Huwei, Yunlin, Taiwan, 632, R.O.C.
*
* Assistant Professor
Get access

Abstract

A computational model for flow in a plain-orifice atomizer is established to examine the inlet and geometry effects on discharge coefficients. The volume of fluid (VOF) method with finite volume formulation was employed to capture the liquid/gas interface. A continuum Surface Force (CSF) model was adopted to model the surface tension. The body-fitted coordinate system was used to facilitate the configuration of the atomizer. The influences of the inlet chamfer angle, the orifice length/diameter ratio, the Reynolds number, and the inlet turbulence intensity are analyzed. It is found that the optimum discharge coefficient occurs at a chamfer angle of about 50°. The discharge coefficient at first increases with the increase in the orifice length/diameter ratio and then it decreases. The discharge coefficient increases with the increase in the Reynolds number up to Re = 40000, after which it remains sensibly constant. The influence of the inlet turbulence intensity on discharge coefficient is not significant, especially for a longer orifice.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable