Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T07:00:45.000Z Has data issue: false hasContentIssue false

Thermal Postbuckling Analysis of 3D Braided Composite Cylindrical Shells

Published online by Cambridge University Press:  05 May 2011

Z.-M. Li*
Affiliation:
School of Mechanical Engineering, State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240, P.R. China
D.-Q. Yang*
Affiliation:
School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, P.R. China
*
* Ph.D., corresponding author
** Professor
Get access

Abstract

Thermal postbuckling analysis is presented for 3D braided composite cylindrical shell of finite length subjected to a uniform temperature rise. Based on a micro-macro-mechanical model, a 3D braided composite may be as a cell system and the geometry of each cell is deeply dependent on its position in the cross-section of the cylindrical shell. The material properties of epoxy are expressed as a linear function of temperature. The governing equations are based on Reddy's higher order shear deformation shell theory with a von Kármán-Donnell-type of kinematic nonlinearity and including thermal effects. A singular perturbation technique is employed to determine the buckling temperatures and postbuckling behaviors of 3D braided composite cylindrical shells. The numerical illustrations concern the postbuckling behavior of perfect and imperfect, braided composite cylindrical shells with different values of geometric parameter and of fiber volume fraction. The results show that the shell has lower buckling temperatures and postbuckling equilibrium paths when the temperature-dependent properties are taken into account. The results reveal that the fiber volume fraction, braiding angle and the shell geometric parameter have a significant effect on the thermal buckling and postbuckling behavior of braided composite cylindrical shells.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable