Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T00:44:20.718Z Has data issue: false hasContentIssue false

Compression Behavior of Annular Elastic Layers Bonded Between Rigid Plates

Published online by Cambridge University Press:  16 October 2012

H.-C. Tsai*
Affiliation:
Department of Construction Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan 10607, R.O.C.
*
* Corresponding author (hctsai@mail.ntust.edu.tw)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

An annular elastic layer bonded between rigid plates and subjected to a compressive force normal to the layer is analyzed through a theoretical approach. On the basis of two kinematic assumptions, the governing equation for the mean pressure is established from the equilibrium equation, which is then solved by satisfying the stress boundary conditions. Through the obtained pressure expression, the compression stiffness of the bonded annular layer is derived in closed form and is very close to the finite element solution. The derived formula has no limitation on the Poisson's ratio and is more concise than the previous research. Through the asymptotic approach, the compression stiffness for the incompressible elastic layers is derived and is more accurate than the previous research obtained by directly neglecting the bulk compressibility. The stiffness reduction caused by the central hole is more prominent when the Poisson's ratio is close to 0.5.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2012