Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T07:05:54.189Z Has data issue: false hasContentIssue false

A Constitutive Model of Sandstone Considering the Post Peak Behavior

Published online by Cambridge University Press:  18 September 2017

F. S. Jeng
Affiliation:
Department of Civil EngineeringNational Taiwan UniversityTaipei, Taiwan
M. C. Weng*
Affiliation:
Department of Civil and Environmental EngineeringNational University of KaohsiungKaohsiung, TaiwanDepartment of Civil EngineeringNational Chiao Tung UniversityHsinchu, Taiwan
F. H. Yeh
Affiliation:
Department of Civil EngineeringNational Taiwan UniversityTaipei, Taiwan
Y. H. Yang
Affiliation:
Department of Civil EngineeringNational Taiwan UniversityTaipei, Taiwan
T. H. Huang
Affiliation:
Department of Civil EngineeringNational Taiwan UniversityTaipei, Taiwan
*
*Corresponding author (mcweng@nuk.edu.tw; mcweng@nctu.edu.tw)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In rock engineering, evaluating the post-peak strength and deformation of rock is necessary. To explore the elasto-plastic behavior of sandstone in the post-peak stage, a series of strain-controlled triaxial tests were conducted under different confining pressures. According to the post-peak characteristics, a constitutive model based on nonlinear elasticity and generalized plasticity is proposed. This proposed model is characterized by the following features: (1) Nonlinear elasticity is observed under hydrostatic and shear loading; (2) the associated flow rule is followed; (3) substantial plastic deformation occurs during shear loading; and (4) post-peak softening behavior is accurately predicted. This model requires twelve material parameters, three for elasticity and nine for plasticity. The proposed model was validated by comparing the triaxial test results of Mushan sandstone at different hydrostatic pressures under dry and saturated conditions. In addition, the model is versatile; it can simulate the deformational behavior of two other sandstones. In summary, the proposed model can reasonably predict the complete stress–strain curve of sandstone.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2019