Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T18:47:55.244Z Has data issue: false hasContentIssue false

Development and Characterization of Jet-Injected Vee-Gutter

Published online by Cambridge University Press:  05 May 2011

Kuo T. Chang*
Affiliation:
Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan 10672, R.O.C.
Rong F. Huang*
Affiliation:
Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan 10672, R.O.C.
*
*Graduate student
**Professor
Get access

Abstract

The vee-gutter, which was conventionally used in a combustor for flame holding, was re-designed by employing the unsteady Coanda effect to inject fluids periodically into near wake of the vee-gutter. Fluidic targets were developed to induce self-sustained transverse oscillation of slit-jet. The self-sustained oscillating jet was conducted through passages and injected into the near wake of the vee-gutter. The behaviors and frequency characteristics of the slit-jet in the oscillation cavity and the turbulence properties in the wake were studied experimentally in a wind-tunnel by using the smoke-wire flow visualization technique and the hot-wire anemometer. The oscillation frequencies of the presently developed jet-injection vee-gutter were about 25 to 40 times higher than that of the conventionally used fluidic flowmeter. By estimating the Lagrangian integral time scale and employing the Taylor's frozen flow hypothesis, the integral length scales of turbulence fluctuations were calculated. The results showed that the integral length scales of turbulences of the jet-injected vee-gutter were significantly smaller than their counter parts of the conventional vee-gutter, which indicated the effects of vortex stretching induced by the periodic jet injection. The modifications of turbulence properties were presented and discussed.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable