Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T17:01:14.891Z Has data issue: false hasContentIssue false

Dynamic Analysis of Non-Symmetric Cracks Extension

Published online by Cambridge University Press:  05 May 2011

Yen-Ling Chung*
Affiliation:
Department of Construction Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan 10672, R.O.C.
Mei-Rong Chen*
Affiliation:
Department of Construction Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan 10672, R.O.C.
*
*Professor
**Graduate student
Get access

Abstract

This paper applies the method of self-similar potentials to analyze the dynamic behaviors of the problems of mode-I, mode-II, and mode-III cracks propagating along the x-axis with constant speed, while the constant speeds of both crack tips are not the same, called nonsymmetric crack expansion. It is assumed that an unbound homogeneous isotropic elastic material is at rest for time t < 0. However, for time t ≥ 0, a central crack starts to extend from zero length along the x-axis. On the crack surfaces of x ≥ 0, there exists uniform distributed load such that the rightmost crack tip propagates with speed ms, while the leftmost crack tip with speed s, where m > 1 and is constant. First, the complete solutions of the mode-I, mode-II, and mode-III problems are obtained. After the complete solutions are found, attention is focused on the crack surface displacements and dynamic stress intensity factors. The results of this study show that the DSIF is equal to the static SIF when the crack-tip speed is zero, and DSIF is zero as the crack-tip speed approaches the Rayleigh-wave speed. Moreover, for the special case m = 1 which indicates that the velocities of both crack tips are the same, the DSIFs of this three modes in this study is the same as those of Ref. [15].

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable