Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T20:46:14.087Z Has data issue: false hasContentIssue false

Effect of Insert Groove Geometry on Chip Breaking Performance

Published online by Cambridge University Press:  19 August 2016

R.-Y. Kuo
Affiliation:
Department of Mechanical Engineering National Cheng Kung University Tainan, Taiwan
J.-J. Junz Wang*
Affiliation:
Department of Mechanical Engineering National Cheng Kung University Tainan, Taiwan
R.-N. Lee
Affiliation:
Department of Mechanical Engineering National Cheng Kung University Tainan, Taiwan
*
*Corresponding author (jjwang@mail.ncku.edu.tw)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The insert groove geometry is an important part of turning tool design. In this article, a systematic design approach is presented for the chip breaker design in turning. The chip breaking ability of various groove geometry of a turning insert is investigated. The ratio of chip thickness to chip curl radius is taken as the index of chip breaking performance. Taguchi method is applied to analyze the contribution to chip breaking performance of each geometric parameter. Response surface methodology is then used to construct a predictive model evaluating the effect of turning conditions and groove geometry on chip breaking performance. The result of this study shows that the feed rate significantly affects chip breaking performance, and that insert with larger land angle, higher back wall and smaller groove is more effective in chip breaking. Among the parameters of the insert groove, the width of the groove has the greatest contribution to chip breaking than the others. The simulation results and predictions are validated by turning experiments.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2018