Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T07:18:50.641Z Has data issue: false hasContentIssue false

Effects of Bubble Location on Pore Shape in Solid

Published online by Cambridge University Press:  20 September 2017

S. Y. Hsiao
Affiliation:
Department of Mechanical and Electro-Mechanical EngineeringNational Sun Yat-Sen UniversityKaohsiung, Taiwan
P. S. Wei*
Affiliation:
Department of Mechanical and Electro-Mechanical EngineeringNational Sun Yat-Sen UniversityKaohsiung, Taiwan
*
*Corresponding author (pswei@mail.nsysu.edu.tw)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The shapes of a pore resulting from an entrapped bubble by a solidification front for different locations of the bubble below the free surface are predicted in this work. Bubble location is an important factor affecting temperature gradient in liquid, solute gas dissipated into the ambient, heterogeneous nucleation of the bubble and shape of the bubble cap, and subsequent entrapment and the pore shape in solid. The shapes of pores in solid influence not only material properties, but also contemporary issues of engineering, biology, medical technology and science, etc. This study takes into account solute transport across a coupling shape of the pore cap determined by the Young-Laplace equation governing balance of liquid, gas and capillary pressures. The results find that increases in depthwise location of a bubble increase pore radius and time for bubble entrapment as solute transport is from the pore across cap emerged through a concentration boundary layer along the solidification front into surrounding liquid in the early stage. On the other hand, the bubble cannot be entrapped, provided that solute transport in opposite directions across the cap submerged in a concentration boundary layer along the solidification front. The predicted growth and entrapment of a tiny bubble as a pore in solid agree with experimental data. Understanding and controlling of the pore shape via controlling bubble location is of interest and challenging.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2019