Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T23:36:46.876Z Has data issue: false hasContentIssue false

Experimental Study on Direct Displacement-Based Seismic Design of RC Columns

Published online by Cambridge University Press:  05 May 2011

Y.-Y. Lin*
Affiliation:
Department of Civil and Water Resources Engineering, National Chiayi University, Chiayi, Taiwan 600, R.O.C.
K.-C. Chang*
Affiliation:
Department of Civil Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C.
Y.-L. Wang*
Affiliation:
Department of Civil Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C.
*
*Assistant Professor
**Professor
***Graduate student
Get access

Abstract

For performance-based seismic engineering of buildings, the direct displacement-based seismic design method is different from the coefficient method used in FEMA-273 and the capacity spectrum method adopted in ATC-40. The method not only is a linear static procedure but also is applied to the design of new constructions. This paper concerns with experimental studies on the accuracy of the direct displacement-based design procedure. Experimental results of three reinforced concrete (RC) columns designed by the displacement procedure are presented and discussed through pseudo-dynamic tests and cyclic loading tests. From the tests, it is shown that the stiffness degrading factor of RC columns plays a key role. The direct displacement-based seismic design method can reliably capture the maximum displacement demand of the test RC columns if the stiffness degrading factor adopted in the displacement design method for RC material is adequate.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable