Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T18:15:40.162Z Has data issue: false hasContentIssue false

A Finite Element Study about CAM-Out Failure of the Recess-Screwdriver Interfaces for the Cold-Welded Periarticular Fixation

Published online by Cambridge University Press:  20 December 2012

C.-Y. Chien
Affiliation:
Graduate Institute of Mechanical and Electrical Engineering, National Taipei University of Technology, Taipei, Taiwan 10608, R.O.C
W.-H. Chuang
Affiliation:
Department of Mechanical Engineering, National Central University, Taoyuan, Taiwan 32001, R.O.C.
W.-C. Tsai
Affiliation:
BoneCare Orthopedic Centers, Han-Chiung Clinics, Taipei, Taiwan 10666, R.O.C.
S.-C. Lin*
Affiliation:
Graduate Institute of Biomedical Engineering, National Taiwan University of Science and Technique, Taipei, Taiwan 10617, R.O.C.
Y.-P. Luh
Affiliation:
Graduate Institute of Mechanical and Electrical Engineering, National Taipei University of Technology, Taipei, Taiwan 10608, R.O.C.
Y.-J. Chen
Affiliation:
Department of Orthopedic Surgery, Chang Gung Memorial Hospital, Chang Gung University, Taoyuan, Taiwan 33302, R.O.C.
*
*Corresponding author (orthodent.cax@gmail.com)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In clinical practice, cam-out failure at the recess-screwdriver interfaces may occur when tightening or removing a bone screw. For titanium-based periarticular fixation, the literature reports have revealed that cold welding at the plate-screw interfaces makes the screw recess especially prone to cam-out failure during screw removal. In this study, the effects of the four recess shapes (cross, hexagon, star, and crest), three torque value (0.8, 1.0, and 1.2N-m), and the three interfacial misfits (0.00, 0.05, and 0.10mm) on the cam-out failure were numerically evaluated. The free-rotation angle, torque-recess angle, slippage-resisting length, and interfacial stress distribution were defined and chosen as comparison indices for the twelve recess-misfit variations. The results revealed that the interfacial slippage, torque transfer, and stress distribution are highly related to both recess shape and interfacial misfit. The stresses of all recesses and screwdrivers consistently initiate at the contact sites. However, the recess profile significantly affects the stress propagation. The stress patterns of the recess and screwdriver are quite different between the cross-star and hexagon-crest groups. The cross-star group is superior to the hexagon-crest group in terms of the torque-recess angle and slippage-resisting length over. This makes the recess of the cross-star group less stressed than its counterpart. However, the volumes of the cross and the star screwdriver are more highly stressed than the hexagon due to the irregular shape and the thinner flange, respectively. The greater torque and misfit increase the performance difference between the four recess designs. In conclusion, the geometry of the cross and star groups provide the better performance of the screw recess in terms of torque-transferring efficiency and slippage-resisting ability. If the screwdriver material is properly strengthened and the stress-concentrating corners are modified, the cross and star groups would be the optimal designs that protects and extends the lifetime of both recess and reused screwdriver.

Information

Type
Technical Note
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2012