Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T15:32:24.251Z Has data issue: false hasContentIssue false
  • English
  • Français

Galerkin Weighted Residual Method for Axially Functionally Graded Shape Memory Alloy Beams

Published online by Cambridge University Press:  02 December 2019

Z. T. Kang,
Z. Y. Wang,
B. ZhouOpen the ORCID record for B. Zhou[Opens in a new window] and
S. F. Xue
Z. T. Kang
Affiliation:
College of Pipeline and Civil Engineering China University of Petroleum (East China) Qingdao, China
Z. Y. Wang
Affiliation:
College of Pipeline and Civil Engineering China University of Petroleum (East China) Qingdao, China
B. Zhou*
Affiliation:
College of Pipeline and Civil Engineering China University of Petroleum (East China) Qingdao, China
S. F. Xue
Affiliation:
College of Pipeline and Civil Engineering China University of Petroleum (East China) Qingdao, China
*
*Corresponding author (zhoubo@upc.edu.cn)
Get access

Abstract

This paper focus on the mechanical and martensitic transformation behaviors of axially functionally graded shape memory alloy (AFG SMA) beams. It is taken into consideration that material properties, such as austenitic elastic modulus, martensitic elastic modulus, critical transformation stresses and maximum transformation strain vary continuously along the longitudinal direction. According to the simplified linear SMA constitutive equations and Bernoulli-Euler beam theory, the formulations of stress, strain, martensitic volume fraction and governing equations of the deflection, height and length of transformed layers are derived. Employing the Galerkin’s weighted residual method, the governing differential equation of the deflection is solved. As an example, the bending behaviors of an AFG SMA cantilever beam subjected to an end concentrated load are numerically analyzed using the developed model. Results show that the mechanical and martensitic transformation behaviors of the AFG SMA beam are complex after the martensitic transformation of SMA occurs. The influences of FG parameter on the mechanical behaviors and geometrical shape of transformed regions are obvious, and should be considered in the design and analysis of AFG SMA beams in the related regions.

Keywords

Axially functionally graded beamshape memory alloyBernoulli-Euler beam theoryGalerkin weighted residual method

Information

Type
Research Article
Information
Journal of Mechanics , Volume 36 , Issue 3 , June 2020, pp. 331 - 345
Copyright
Copyright © 2019 The Society of Theoretical and Applied Mechanics

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

Zhao, L., Chen, W. Q. and Lü, C. F., “Symplectic elasticity for bi-directional functionally graded materials,” Mechanics of Materials, 54, pp.32–42 (2012).CrossRefGoogle Scholar
Naebe, M. and Shirvanimoghaddam, K., “Functionally graded materials: A review of fabrication and properties,” Applied Materials Today, 5, pp.223–245 (2016).CrossRefGoogle Scholar
Reddy, J. N., “Analysis of functionally graded plates,” International Journal for Numerical Methods in Engineering, 47(1–3), pp.663–684 (2010).3.0.CO;2-8>CrossRefGoogle Scholar
Pradhan, K. K. and Chakraverty, S., “Free vibration of Euler and Timoshenko functionally graded beams by Rayleigh-Ritz method,” Composites Part B: Engineering, 51, pp.175–184 (2013).CrossRefGoogle Scholar
Heydari, A., Jalali, A. and Nemati, A., “Buckling analysis of circular functionally graded plate under uniform radial compression including shear deformation with linear and quadratic thickness variation on the Pasternak elastic foundation,” Applied Mathematical Modelling, 41, pp.494–507 (2017).CrossRefGoogle Scholar
Zhou, B., Liu, Y. J., Leng, J. S. and Zou, G. P., “A macro-mechanical constitutive model of shape memory alloys,” Science in China Series G: Physics, Mechanics and Astronomy, 52(9), pp.1382–1391 (2009).CrossRefGoogle Scholar
Zhou, B., “A macroscopic constitutive model of shape memory alloy considering plasticity,” Mechanics of Materials, 48(4), pp.71–81 (2012).CrossRefGoogle Scholar
Zheng, Y., Dong, Y. and Li, Y., “Resilience and life-cycle performance of smart bridges with shape memory alloy (SMA)-cable-based bearings,” Construction and Building Materials, 158, pp.389400 (2018).CrossRefGoogle Scholar
Jhou, W. T., Wang, C., Ii, S., Chiang, H. S. and Hsueh, C. H., “TiNiCuAg shape memory alloy films for biomedical applications,” Journal of Alloys and Compounds, 738, pp.336–344 (2018).CrossRefGoogle Scholar
Choudhary, N. and Kaur, D., “Shape memory alloy thin films and heterostructures for MEMS applications: A review,” Sensors and Actuators A: Physical, 242, pp.162–181 (2016).CrossRefGoogle Scholar
Fu, Y., Du, H. and Zhang, S., “Functionally graded TiN/TiNi shape memory alloy films,” Materials Letters, 57(20), pp.2995–2999 (2003).CrossRefGoogle Scholar
Mahmud, A. S., Liu, Y. and Nam, T. H., “Design of functionally graded NiTi by heat treatment,” Physica Scripta T, T129, pp.222–226 (2007).CrossRefGoogle Scholar
Yang, S., Kang, S., Lim, Y. M., Lee, Y., Kim, J. and Nam, T., “Temperature profiles in a Ti-45Ni-5Cu (at%) shape memory alloy developed by the Joule heating,” Journal of Alloys and Compounds, 490(1–2), pp.L28–L32 (2010).CrossRefGoogle Scholar
Meng, Q., Liu, Y., Yang, H. and Nam, T. H., “Laser annealing of functionally graded NiTi thin plate,” Scripta Materialia, 65(12), pp.1109–1112 (2011).CrossRefGoogle Scholar
Meng, Q., Liu, Y., Yang, H., Shariat, B. S. and Nam, T. H., “Functionally graded NiTi strips prepared by laser surface anneal,” Acta Materialia, 60(4), pp.1658–1668 (2012).CrossRefGoogle Scholar
Meng, Q., Yang, H., Liu, Y. and Nam, T. H., “Compositionally graded NiTi plate prepared by diffusion annealing,” Scripta Materialia, 67(3), pp.305–308 (2012).CrossRefGoogle Scholar
Meng, Q., Wu, Z., Bakhtiari, R., Shariat, B. S., Yang, H., Liu, Y. and Nam, T.H., “A unique “fishtail-like” four-way shape memory effect of compositionally graded NiTi,” Scripta Materialia, 127, pp.84–87 (2017).CrossRefGoogle Scholar
Shariat, B. S., Liu, Y. and Rio, G., “Thermomechanical modelling of microstructurally graded shape memory alloys,” Journal of Alloys and Compounds, 541, pp.407–414 (2012).CrossRefGoogle Scholar
Shariat, B. S., Liu, Y. and Rio, G., “Mathematical modelling of pseudoelastic behaviour of tapered NiTi bars,” Journal of Alloys and Compounds, 577(SUPPL. 1), pp.S76–S82 (2013).CrossRefGoogle Scholar
Shariat, B. S., Liu, Y. and Rio, G., “Modelling and experimental investigation of geometrically graded NiTi shape memory alloys,” Smart Materials and Structures, 22(2), pp.025030 (2013).CrossRefGoogle Scholar
Mohri, M. and Nili-Ahmadabadi, M., “Phase transformation and structure of functionally graded Ni-Ti bi-layer thin films with two-way shape memory effect,” Sensors and Actuators A: Physical, 228, pp.151–158 (2015).CrossRefGoogle Scholar
Mohri, M., Taghizadeh, M., Wang, D., Hahn, H. and Nili-Ahmadabadi, M., “Microstructural study and simulation of intrinsic two-way shape memory behavior of functionally graded Ni-rich/NiTiCu thin film,” Materials Characterization, 135, pp.317–324 (2018).CrossRefGoogle Scholar
Liu, B., Wang, Q., Zhou, R., Du, C., Zhang, Y. and Zhang, P., “Study on behaviors of functionally graded shape memory alloy cylinder,” Acta Mechanica Solida Sinica, 30(6), pp.608–617 (2017).CrossRefGoogle Scholar
Shariat, B. S., Meng, Q., Mahmud, A. S., Wu, Z., Bakhtiari, R., Zhang, J., Motazedian, F., Yang, H., Rio, G., Nam, T. H. and Liu, Y., “Functionally graded shape memory alloys: Design, fabrication and experimental evaluation,” Materials and Design, 124, pp.225–237 (2017).CrossRefGoogle Scholar
Shariat, B. S., Bakhtiari, R. and Liu, Y., “Nonuniform transformation behaviour of NiTi in a discrete geometrical gradient design,” Journal of Alloys and Compounds, 774, pp.1260–1266 (2019).CrossRefGoogle Scholar
Shariat, B. S., Meng, Q., Mahmud, A. S., Wu, Z., Bakhtiari, R., Zhang, J., Motazedian, F., Yang, H., Rio, G., Nam, T. H. and Liu, Y., “Experiments on deformation behaviour of functionally graded NiTi structures,” Data in Brief, 13, pp.562–568 (2017).CrossRefGoogle ScholarPubMed
Khaleghi, F., Tajally, M., Emadoddin, E. and Mohri, M., “The investigation of the mechanical properties of graded high- temperature shape memory Ti-Ni-Pd alloy,” Journal of Alloys and Compounds, 787, pp.882–892 (2019).CrossRefGoogle Scholar
Shariat, B. S., Liu, Y., Meng, Q. and Rio, G., “Analytical modelling of functionally graded NiTi shape memory alloy plates under tensile loading and recovery of deformation upon heating,” Acta Materialia, 61(9), pp.3411–3421 (2013).CrossRefGoogle Scholar
Shariat, B. S., Liu, Y. and Bakhtiari, S., “Modelling and experimental investigation of geometrically graded shape memory alloys with parallel design configuration,” Journal of Alloys and Compounds, 791, pp.711–721 (2019).CrossRefGoogle Scholar
Liu, B., Dui, G. and Yang, S., “On the transformation behavior of functionally graded SMA composites subjected to thermal loading,” European Journal of Mechanics-A/Solids, 40, pp.139–147 (2013).CrossRefGoogle Scholar
Xue, L., Dui, G., Liu, B. and Xin, L., “A phenomenological constitutive model for Functionally Graded Porous Shape Memory Alloy,” International Journal of Engineering Science, 78, pp.103–113 (2014).CrossRefGoogle Scholar
Asadi, H., Akbarzadeh, A. H. and Wang, Q., “Nonlinear thermo-inertial instability of functionally graded shape memory alloy sandwich plates,” Composite Structures, 120, pp.496–508 (2015).CrossRefGoogle Scholar
Liu, B., Ni, P. and Zhang, W., “On Behaviors of Functionally Graded SMAs under Thermo-Mechanical Coupling,” Acta Mechanica Solida Sinica, 29(1), pp.46–58 (2016).CrossRefGoogle Scholar
Liu, H., Wang, J. and Dai, H. H., “Analytical study on stress-induced phase transitions in geometrically graded shape memory alloy layers. Part I: Asymptotic equation and analytical solutions,” Mechanics of Materials, 112, pp.40–55 (2017).CrossRefGoogle Scholar
Liu, B., Wang, Q., Zhou, R., Du, C., Zhang, Y. and Zhang, P., “Study on behaviors of functionally graded shape memory alloy cylinder,” Acta Mechanica Solida Sinica, 30(6), pp.608–617 (2017).CrossRefGoogle Scholar
Soltanieh, G., Kabir, M. Z. and Shariyat, M., “Snap instability of shallow laminated cylindrical shells reinforced with functionally graded shape memory alloy wires,” Composite Structures, 180, pp.581–595 (2017).CrossRefGoogle Scholar
Viet, N. V., Zaki, W. and Umer, R., “Analytical model of functionally graded material/shape memory alloy composite cantilever beam under bending,” Composite Structures, 203, pp.764–776 (2018).CrossRefGoogle Scholar
Zhou, B., Yoon, S. and Leng, J. S., “A three-dimensional constitutive model for shape memory alloy,” Smart Materials and Structures, 18(9), pp.095016 (2009).CrossRefGoogle Scholar
Li, X., Li, L., Hu, Y., Ding, Z., and Deng, W., “Bending, buckling and vibration of axially functionally graded beams based on nonlocal strain gradient theory,” Composite Structures, 165, pp.250–265 (2017).CrossRefGoogle Scholar
Xue, L. J., Dui, G. S. and Liu, B. F., “A micromechanical model for the functionally graded shape memory alloy,” Engineering Mechanics, 31(2), pp.225–229 (2014). (in Chinese)Google Scholar