Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T09:51:18.750Z Has data issue: false hasContentIssue false

Impact Fracture of Polymer-Filled Braided Composite Tubes

Published online by Cambridge University Press:  02 December 2019

S. F. Hwang*
Affiliation:
Department of Mechanical Engineering, National Yunlin University of Science and TechnologyDouliu, Yunlin 64002, Taiwan, ROC
H. L. Yu
Affiliation:
Department of Mechanical Engineering, National Yunlin University of Science and TechnologyDouliu, Yunlin 64002, Taiwan, ROC
*
*Corresponding author (hwangsf@yuntech.edu.tw)
Get access

Abstract

Three types of polymer including polyurethane, polyethylene, and polysulfone were used as filler inside composite tubes to evaluate their effects on the crashworthiness. The composite tube consisting of carbon fiber fabric and polyurethane was fabricated by resin transfer molding and subjected to impact loading. In addition, the finite element analysis with progressive failure and delamination was used to simulate the crushing behavior of the polymer-filled composite tube. From the comparison between experiment and simulation, the finite element analysis is reliable, could reasonably describe the crushing behavior of the polymer-filled tube, and has nice prediction on the crashworthiness performance. From both the experiment and simulation results, the polyethylene-filled composite tube has clearly higher specific absorbed energy than the hollow composite tube, and polyethylene could be considered as an effective filler. However, the other two types of polymer filler have no clear effect.

Information

Type
Research Article
Copyright
Copyright © 2019 The Society of Theoretical and Applied Mechanics

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable