Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T17:25:58.040Z Has data issue: false hasContentIssue false

Master Curve of Creep in Polymeric Off-Axis Composite Laminates

Published online by Cambridge University Press:  05 May 2011

H-W. Hu*
Affiliation:
Composite Materials and Structures Laboratory, Department of Vehicle Engineering, National Pingtung University of Science and Technology, Neipu, Pingtung, Taiwan 91201, R.O.C.
*
*Associate Professor
Get access

Abstract

An approach to establish a master curve for effective creep compliances of polymeric off-axis composites with various fiber orientations was presented. Carbon/epoxy composite IM7/977–3 was used to fabricate four types of off-axis specimens and then subjected to momentary creep tests after a period of initial aging. Creep compliance and elastic compliance were separated from the total compliance. Using one-parameter creep potential theory, creep compliances were transformed to effective creep compliances. After choosing a proper value for the one-parameter, all effective creep compliances with various off-axis fiber orientations were superposed into a master curve. This master curve enables us to obtain creep compliance with any off-axis fiber orientation by testing only one off-axis specimen.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable