Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T06:55:24.369Z Has data issue: false hasContentIssue false

Mechanics of Matrix Cracking in Bonded Composites

Published online by Cambridge University Press:  05 May 2011

Y.-C. Chiang*
Affiliation:
Department of Mechanical Engineering, Chinese Culture University, Taipei, Taiwan 11114, R.O.C.
*
*Associate Professor
Get access

Abstract

In this paper, a general matrix cracking model including the effect of fiber/matrix debonding in the crack wake is developed for a unidirectional fiber reinforced composite. The debonding mechanics is incorporated into matrix cracking model by treating the crack-wake debonding as a particular crack propagation problem along the interface. Then, the closed-form analytical solution of the critical stress for the onset of widespread matrix cracking is derived, based on the analysis of steady state crack growth in the matrix. The fracture mechanics approach adopted in the present analysis is compared with the analysis in which the crack-wake debonding mechanics was modeled by energy balance approach. The conditions for attaining no-debonding and debonding as onset of widespread matrix cracking are discussed in terms of the interfacial properties of debond toughness and frictional shear stress. The theoretical results are compared with experimental data that are available in the literature.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable