Hostname: page-component-74656f9884-j7cmm Total loading time: 0 Render date: 2026-11-10T08:43:11.276Z Has data issue: false hasContentIssue false

Micro-Droplets Atomizer Using PZT Ring Actuator

Published online by Cambridge University Press:  05 May 2011

Y.-L. Huang*
Affiliation:
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C. Laboratoire des Ecoulements Géophysiques et Industriels, University of Joseph Fourier, Domaine Universitaire, BP 53, 38041 Grenoble, cedex 9, France
S.-H. Chang*
Affiliation:
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C.
*
*Ph.D.
**Professor, corresponding author
Get access

Abstract

This paper presents the ultrasonic atomizer composed of the lead zirconate titanate (PZT) ring actuator and the Ni nozzle plate with numerous minute nozzles. The atomizer operates at its resonant frequency in out-of-plane vibration. De-ionized (DI) water is fed by the open trough to the porous sponge that is in contact with one face of the nozzle plate and it is ejected through nozzles. Micro-droplets are formed at the opposite face of the nozzle plate. The resonance frequencies of the PZT ring are investigated and compared in theoretical analysis, three-dimensional (3-D) finite-element models (FEM) numerical simulation, and experimental measurement. The performance of the atomizer is examined. This ring shape design of ultrasonic atomizer demonstrates advantage of high atomization rate (64.3ml/min) and high atomization efficiency (l,007ml/h/W) at low power consumption (8.244W).

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable