Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T13:06:17.893Z Has data issue: false hasContentIssue false

Nonlinear Frequency Response Analysis and Jump Avoidance Design of Molecular Spring Isolator

Published online by Cambridge University Press:  14 July 2016

M.-C. Yu
Affiliation:
State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and Astronautics Nanjing, China
X. Gao
Affiliation:
State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and Astronautics Nanjing, China
Q. Chen*
Affiliation:
State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and Astronautics Nanjing, China
*
*Corresponding author (Q.Chen@nuaa.edu.cn)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Molecular spring vibration isolation technology has been invented in the recent years but it still needs further development in dynamics theory. A molecular spring isolation (MSI) consists of water and hydrophobic zeolites as working medium, providing high-static-low-dynamic stiffness. The dynamic properties of MSI are thoroughly investigated in this paper. Firstly, the nonlinear dynamic model of a vibration system support by MSI, i.e. the equation of motion, is established. Then the averaging method is employed to estimate the frequency response function (FRF) of the primary resonance. The phase trajectories diagram evolvement of primary resonance is also investigated to analysis the stability of the primary resonance response. From the plot of FRF, it is found that there exists a jump phenomenon induced by nonlinear stiffness, which may have harmful impacts on the equipment which is supposed to be protected from vibrations and shocks. To avoid jump, the FRF is analyzed to find the critical values of system parameters and a jump avoidance criterion is introduced.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2016