Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T15:47:33.147Z Has data issue: false hasContentIssue false

Overview Study of Solder Joint Reliablity due to Creep Deformation

Published online by Cambridge University Press:  02 July 2018

V. Ramachandran
Affiliation:
Department of Power Mechanical EngineeringNational Tsing Hua UniversityHsinchu, Taiwan
K. C. Wu
Affiliation:
Department of Power Mechanical EngineeringNational Tsing Hua UniversityHsinchu, Taiwan
K. N. Chiang*
Affiliation:
Department of Power Mechanical EngineeringNational Tsing Hua UniversityHsinchu, Taiwan
*
*Corresponding author (knchiang@pme.nthu.edu.tw)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The effective lifetimes of electronic packages are affected by various thermos-mechanical deformations. Creep is considered the most salient mechanism in the failure of solder joints. Many researchers have conducted reasonable studies to portray the behavior of creep deformation using numerical models and further extended their research scope to forecast the lifetimes of packages with the results obtained from creep models. Many studies have identified particular creep and lifetime models to be nominal based on experimental data.

In this study, the characteristics of familiar creep models were examined in detail, and their significance was made known. Lifetime prediction models that seem prominent among researchers were discussed in detail. Finite element analysis of a wafer level chip-scale package (WLCSP) used to figure out the engagement of different creep models and their capability of materializing creep deformation was investigated via simulation. The results from the simulation were applied to different lifetime prediction models, and their predictions were examined carefully. After considering the various factors that affected the reliability study of the solders, the Garofalo-Arrhenius creep model and modified strain energy density model seemed to be convincingly productive for studying the reliability of various electronic packages.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2018