Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T10:34:18.940Z Has data issue: false hasContentIssue false

Parametric Studies of Shape Memory Alloy Hybrid Composite Laminates Under Low-Velocity Impact

Published online by Cambridge University Press:  20 April 2016

Y.-C. Lin*
Affiliation:
School of Defense Science Chung Cheng Institute of Technology National Defense University Taoyuan, Taiwan
Y.-L. Chen
Affiliation:
Department of Power Vehicle and Systems Engineering Chung Cheng Institute of Technology National Defense University Taoyuan, Taiwan
H.-W. Chen
Affiliation:
Chung San Institute of Sciences and Technology Taoyuan, Taiwan
*
*Corresponding author (g951701@hotmail.com)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In the paper, the influence of shape memory alloy (SMA) by varying the parameters such as volume fraction, orientation, and temperature on the hybrid-SMA composite laminate subjected to low-velocity impact is studied. A theoretical model for the composite laminated plate bonded with SMA reinforced layers is presented. The constitutive relation of the SMA layer is obtained by using the method of micromechanics. The governing relations obtained can be used for theoretical predications of thermomechanical properties of SMA plies in this paper. The analytical expressions for the hybrid SMA composite plate are derived based on Tanaka's constitutive equation and linear phase transformation kinetics presented by Liang and Rogers.

The laminated plate theory, first-order shear deformation theory and minimal potential energy principle is utilized to solve the governing equations of the hybrid composite plate and calculate the absorbed energies including tensile, shear and bending.

An orthogonal array and analysis of variance is employed to investigate the influence of the mentioned parameters on the energy absorption of the hybrid laminated plate. The results showed that the effects of the phase transformation temperature are more significant than the effects of the volume fraction and orientation of SMA on structural energy absorption.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2016