Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T16:32:58.390Z Has data issue: false hasContentIssue false

Seismic Performance and Effects of Different Joint Shapes for Unbonded Precast Segmental Bridge Columns

Published online by Cambridge University Press:  14 April 2016

H.-L. Wang*
Affiliation:
The Institute of Bridge Engineering Dalian University of Technology Dalian, China
S.-W. Liu
Affiliation:
The Institute of Bridge Engineering Dalian University of Technology Dalian, China
Z. Zhang
Affiliation:
The Institute of Bridge Engineering Dalian University of Technology Dalian, China
*
*Corresponding author (wanghuili@dlut.edu.cn)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

To study the seismic performance and the effects of different joint shapes for unbonded precast segmental bridge columns under low-reversed cyclic loading, two 3-D finite element (FE) models respectively using plane-contact joints and shear resistant joints were established. In the FE models, the mechanical behaviors of concrete and tendons were respectively described by the damage-plastic model and the bilinear model, and the contact criteria was based on Coulomb's Friction. The results of nonlinear time history analysis showed that the deformation of the columns was mainly composed of alternately open-closed joints, and the failure of the column was mainly caused by concrete crush on the bottom segment. Compared with two model's hysteresis loop, backbone curve, ductility and residual deformation, it was found that the column with shear resistant joints had longer stable period of strength, better ductility, and smaller residual displacement than the column with plane-contact joints, so it had better seismic performance.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2016