Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T10:33:38.389Z Has data issue: false hasContentIssue false

Simulation of Flow Past a Cylinder With Adaptive Spectral Element Method

Published online by Cambridge University Press:  09 September 2016

L.-C. Hsu*
Affiliation:
Department of Mechanical Engineering National Yunlin University of Science and Technology Yunlin, Taiwan
J.-Z. Ye
Affiliation:
Department of Mechanical Engineering National Yunlin University of Science and Technology Yunlin, Taiwan
C.-H. Hsu
Affiliation:
Department of Mechanical Engineering National Yunlin University of Science and Technology Yunlin, Taiwan
*
*Corresponding author (edhsu@yuntech.edu.tw)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The simulations of flow past a two-dimensional circular cylinder are conducted to investigate the feasibility of adaptive mesh refinement applied on curved spectral elements. The nonconforming spectral element method and adaptive meshes technique are used to the curve surfaces and observe whether any discontinuity of the solutions. The adaptive nonconforming spectral element method is implemented to compare with those obtained by conforming mesh method with respect to several existing numerical and experimental studies. Meanwhile, three kinds of estimated error base mesh adaptation are conducted to compare their accuracy and efficiency with conforming mesh method. The results show adaptive nonconforming mesh method is more efficient than the conforming method. Especially, the vorticity error based method performs highest accuracy and fastest convergence. The results show this mesh refinement technique is applicable on the curved elements with satisfactory accuracy. It releases this technique may be applied on the simulations of flow past objects with more general geometries.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2017