Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T13:31:12.256Z Has data issue: false hasContentIssue false

Simulation of Wire Bonding Process Using Explicit Fem with Ale Remeshing Technology

Published online by Cambridge University Press:  02 December 2019

C. C. Yang
Affiliation:
Dept. of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
Y. F. Su
Affiliation:
Dept. of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
Steven Y. Liang
Affiliation:
Georgia Institute of Technology, George W Woodruff School of Mechanical Engineering, Atlanta, USA
K. N. Chiang*
Affiliation:
Dept. of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
*
*Corresponding author (knchiang@pme.nthu.edu.tw)
Get access

Abstract

Thermosonic wire bonding is a common fabrication process for connecting devices in electronic packaging. However, when the free air ball (FAB) is compressed onto the I/O pad of the chip during bonding procedure, chip cracking may occur if the contact pressure is too large. This study proposes an effective simulation technique that can predict the wire ball geometry after bonding in an accurate range. The contact force obtained in the simulation can be used for possible die cracking behavior evaluation. The simulation in this study used the explicit time integration scheme to deal with the time marching problem, and the second-order precision arbitrary Lagrangian-Eulerian (ALE) algorithm was used to deal with the large deformation of the wire ball during the bonding process. In addition, the equilibrium smoothing algorithm in LS-DYNA can make the contact behavior and geometry of the bonding wire almost the same as the experiment, which can also significantly reduce the distortion of the mesh geometry after remeshing.

Information

Type
Articles
Copyright
Copyright © 2019 The Society of Theoretical and Applied Mechanics 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable