Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T19:07:50.614Z Has data issue: false hasContentIssue false

Square-Cylinder Flow Characteristics Modulated Using Upstream Control Rod

Published online by Cambridge University Press:  08 May 2012

S. C. Yen*
Affiliation:
Department of Mechanical and Mechatronic Engineering, National Taiwan Ocean University, Keelung, Taiwan 20224, R.O.C.
S. F. Wu
Affiliation:
Department of Mechanical and Mechatronic Engineering, National Taiwan Ocean University, Keelung, Taiwan 20224, R.O.C.
*
*Corresponding author (scyen@mail.ntou.edu.tw)

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The flow patterns, vortex-shedding frequency and aerodynamic performance of the square-cylinder flow were modulated using an upstream control rod. Additionally, the flow behaviors were examined using various Reynolds numbers, rotation angles, and spacing ratios. The flow patterns were visualized using the smoke-wire scheme. The global velocity fields and streamline patterns were analyzed using the particle image velocimetry (PIV). Additionally, the flow modes were characterized based on the kinematics theory. Moreover, the vortex-shedding frequencies behind upstream control rod and the square cylinder were detected using two hot-wire anemometers. The surface pressure on square cylinder was determined using a linear pressure scanner. Then, the aerodynamic parameters were calculated using the surface-pressure profiles. Three characteristic flow modes — single, attached, and bi-vortex-street — were categorized by varying the Reynolds number and spacing ratio. In the attached mode, the position of upstream control rod determined the flow characteristics. Furthermore, in the attached mode, the mean drag force of the square cylinder is about 57% lower than of single-square cylinder.

Information

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2012