Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T17:50:24.077Z Has data issue: false hasContentIssue false

Vibration Analysis for Piezoceramic Circular Plates with V-Notches. Part 1: Theory

Published online by Cambridge University Press:  12 August 2014

C.-H. Huang*
Affiliation:
Department of Mechanical Engineering, Chien Hsin University of Science and Technology, Taoyuan County, Taiwan
Y.-Y. Chen
Affiliation:
Department of Mechanical Engineering, Chien Hsin University of Science and Technology, Taoyuan County, Taiwan

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In this paper the transverse vibration characteristics of piezoceramic circular plates with V-notches are investigated theoretically through use of the Ritz's method incorporated with the defined equivalent constants. The Ritz's method is employed with two sets of admissible displacement functions, algebraic-trigonometric polynomials and corner functions, to guarantee convergence sufficiently and represent the stress singularity, respectively. Moreover, the equivalent constants derived by comparing the characteristic equations of transverse vibration between isotropic and piezoceramic disks are applied to suspend the electrical field consideration regarding the piezoelectricity. With the aid of theoretical analysis, the non-dimensional frequency parameters of transverse vibration modes for completely free V-notching circular plates are exhibited; in addition, the frequency variations depending on various notch angles and depths are explored. Numerical calculations using the finite element method (FEM) are performed and the results are compared with the theoretical analysis. It is shown that the resonant frequencies predicted by theoretical analysis and calculated by FEM are in good agreement.

Information

Type
Research Article
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2014