Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-14T18:02:15.197Z Has data issue: false hasContentIssue false

High-power laser beam shaping using apodized apertures

Published online by Cambridge University Press:  09 March 2009

S. G. Lukishova
Affiliation:
Institute of Radioengineering and Electronics, USSR Academy of Sciences, Centre, Marx Prospekt 18, 103907, Moscow, USSR
P. P. Pashinin
Affiliation:
Institute of General Physics, Moscow, USSR
S. Kh. Batygov
Affiliation:
Institute of General Physics, Moscow, USSR
V. A. Arkhangelskaya
Affiliation:
State Optical Institute, Leningrad, USSR
A. E. Poletimov
Affiliation:
State Optical Institute, Leningrad, USSR
A. S. Scheulin
Affiliation:
State Optical Institute, Leningrad, USSR
B. M. Terentiev
Affiliation:
All-Union Institute of Radiation Engineering, Moscow, USSR
Get access

Abstract

This paper gives the results of the investigations of four types of apodized (soft) apertures for beam shaping of UV, visible and IR high-power lasers with near-Gaussian and flat-top transmittance. The apodized apertures (AA) are ≈3–45 mm in diameter, but the principles of fabrication of such apertures lends the possibility of apodizing beams with diameter <1 mm and >200 mm. The examples of studies of the AA in high-power lasers are presented. The possibility of avoiding the Fresnel diffraction ripples is proved experimentally.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable