Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T16:14:15.912Z Has data issue: false hasContentIssue false

National Ignition Facility target design and fabrication

Published online by Cambridge University Press:  01 August 2008

R.C. Cook*
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
B.J. Kozioziemski
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
A. Nikroo
Affiliation:
General Atomics, San Diego, California
H.L. Wilkens
Affiliation:
General Atomics, San Diego, California
S. Bhandarkar
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
A.C. Forsman
Affiliation:
General Atomics, San Diego, California
S.W. Haan
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
M.L. Hoppe
Affiliation:
General Atomics, San Diego, California
H. Huang
Affiliation:
General Atomics, San Diego, California
E. Mapoles
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
J.D. Moody
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
J.D. Sater
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
R.M. Seugling
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
R.B. Stephens
Affiliation:
General Atomics, San Diego, California
M. Takagi
Affiliation:
Lawrence Livermore National Laboratory, Livermore, California
H.W. Xu
Affiliation:
General Atomics, San Diego, California
*
Address correspondence and reprint requests to: Robert Cook, Lawrence Livermore National Laboratory, P. O. Box 808, Livermore, CA 94550. E-mail: bobcook@llnl.gov
Get access

Abstract

The current capsule target design for the first ignition experiments at the NIF Facility beginning in 2009 will be a copper-doped beryllium capsule, roughly 2 mm in diameter with 160-µm walls. The capsule will have a 75-µm layer of solid deuterium-tritium on the inside surface, and the capsule will be powered by X-rays generated from a gold/uranium cocktail hohlraum. The design specifications are extremely rigorous, particularly with respect to interfaces, which must be very smooth to inhibit Rayleigh-Taylor instability growth. This paper outlines the current design, and focuses on the challenges and advances in capsule fabrication and characterization; hohlraum fabrication, and deuterium-tritium layering and characterization.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable