Hostname: page-component-74656f9884-c52kr Total loading time: 0 Render date: 2026-11-09T13:49:23.169Z Has data issue: false hasContentIssue false

Nuclear-powered laser beam profile control method

Published online by Cambridge University Press:  09 March 2009

M. Petra
Affiliation:
University of Illinois, Fusion Studies Laboratory, Urbana, IL 61801
G.H. Miley
Affiliation:
University of Illinois, Fusion Studies Laboratory, Urbana, IL 61801
Get access

Abstract

The control of the extracted beam quality of a nuclear-pumped laser is a major issue. One possible control method involves changing the spatial power deposition profile, which is a function of the gas pressure and the pumping mechanism. Thus, we proposed a combined He-3 and wall coating (e.g., B-10 or U-235) technique. Then, the pump power deposition profile can be adjusted by varying the He-3 partial pressure. To examine this technique, measurements are being performed with an in-core cell by imaging the radiation-induced fluorescence onto a linear diode array located some distance from the cell. Results from these measurements are presented and other related issues such as gas dynamics, index of refraction effects, and efficient beam extraction from a large-volume cavity are discussed.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable