Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-19T06:55:38.449Z Has data issue: false hasContentIssue false

The pulsed laser damage sensitivity of optical thin films, thermal conductivity†

Published online by Cambridge University Press:  09 March 2009

Arthur H. Guenther
Affiliation:
Air Force Weapons Laboratory, Kirtland Air Force Base, New Mexico, 87117, USA
John K. McIver
Affiliation:
Center for Advanced Studies and Dept. of Physics and Astronomy, University of New Mexico, Albuquerque, New Mexico, 87131, USA
Get access

Abstract

Pulsed laser induced damage of optical thin films is, in general, initiated by the absorption of laser radiation by imperfections in the films or at interfaces between film layers and/or the substrate. A heat flow analysis of this process stresses the importance that the thermal conductivity of both the thin film host and that of the substrate play in establishing the laser-induced damage threshold. Unfortunately, recent work, which will be reviewed in this presentation, indicates that the thermal conductivity of thin films can be several orders of magnitude lower than that of the corresponding material in bulk form. This situation arises as a consequence of the film structure resulting principally from the deposition process. The importance of thermal conductivity will be compared to parameters such as absorption mechanisms, film materials, composition, and other variables. Its implication for the ultimate optical strength of materials and the direction in which thin film research and processing should proceed will be highlighted.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable