Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T15:34:52.132Z Has data issue: false hasContentIssue false

X-ray emission from an X-pinch and its applications

Published online by Cambridge University Press:  29 July 2008

R. Liu
Affiliation:
Department of Electrical Engineering, Tsinghua University, Beijing, China
X. Zou
Affiliation:
Department of Electrical Engineering, Tsinghua University, Beijing, China
X. Wang*
Affiliation:
Department of Electrical Engineering, Tsinghua University, Beijing, China
N. Zeng
Affiliation:
Department of Electrical Engineering, Tsinghua University, Beijing, China
L. He
Affiliation:
Department of Electrical Engineering, Tsinghua University, Beijing, China
*
Address correspondence and reprint request to: Xinxin Wang, Department of Electrical Engineering, Tsinghua University, Beijing 100084, China. E-mail: wangxx@mail.tsinghua.edu.cn
Get access

Abstract

The temporal and spatial X-ray emission from PPG-X, an X-pinch driven by pulsed power generator, was studied by using diamond photo-conducting detectors and pinhole cameras. It was found that the X-ray pulse usually consists of two sub-nanosecond peaks with a time interval of about 0.5 ns, these two X-ray peaks are consistent with two point sources of X-ray recorded with pinhole camera. The total X-ray energy changes from shot to shot and is averaged to be 0.35 J for hν > 1.5 keV. The size of the X-ray point source is in the range from 100 µm to 5 µm, decreasing rapidly with the increase of the photon energy. The X-pinch was used as X-ray source for backlighting the electrical explosion of single wire and for phase-contrast imaging of a mosquito.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable