Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T03:31:07.479Z Has data issue: false hasContentIssue false

Computer modeling of ICF target chamber phenomena

Published online by Cambridge University Press:  09 March 2009

Gregory A. Moses
Affiliation:
Fusion Technology Institute, University of Wisconsin, 1500 Johnson Drive, Madison WI 53706
Robert R. Peterson
Affiliation:
Fusion Technology Institute, University of Wisconsin, 1500 Johnson Drive, Madison WI 53706
Get access

Abstract

The target chamber of an inertial confinement fusion (ICF) power plant or high-yield test facility must be designed to absorb the target produced Xrays and ions and survive the resulting effects. The target chamber conditions must be restored in fractions of a second for high repetition rate power applications. Computer modeling of these phenomena is essential because equivalent conditions cannot be produced in laboratory experiments prior to the first ignition of high-yield ICF targets. Choices of models are dictated by specific reactor design strategies. The two major strategies, gas protection and sacrificial first surfaces, are used as a guide to our discussion. Physical models for ion, electron, and X-ray deposition are discussed, along with physical and numerical modeling of the resulting phase changes intarget chamber structures. The hydrodynamics and radiative transfer in the target chamber vapors and plasmas are central topics.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable