Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T19:01:48.807Z Has data issue: false hasContentIssue false

Development of a high-power KrF laser system, ASHURA

Published online by Cambridge University Press:  09 March 2009

Y. Owadano
Affiliation:
Electrotechnical Laboratory, Agency of Industrial Science and Technology, 1-1-4 Umezono, Tsukuba, Ibaraki, Japan 305
I. Okuda
Affiliation:
Electrotechnical Laboratory, Agency of Industrial Science and Technology, 1-1-4 Umezono, Tsukuba, Ibaraki, Japan 305
Y. Matsumoto
Affiliation:
Electrotechnical Laboratory, Agency of Industrial Science and Technology, 1-1-4 Umezono, Tsukuba, Ibaraki, Japan 305
M. Tanimoto
Affiliation:
Electrotechnical Laboratory, Agency of Industrial Science and Technology, 1-1-4 Umezono, Tsukuba, Ibaraki, Japan 305
T. Tomie
Affiliation:
Electrotechnical Laboratory, Agency of Industrial Science and Technology, 1-1-4 Umezono, Tsukuba, Ibaraki, Japan 305
K. Koyama
Affiliation:
Electrotechnical Laboratory, Agency of Industrial Science and Technology, 1-1-4 Umezono, Tsukuba, Ibaraki, Japan 305
M. Yano
Affiliation:
Electrotechnical Laboratory, Agency of Industrial Science and Technology, 1-1-4 Umezono, Tsukuba, Ibaraki, Japan 305
Get access

Abstract

The present status of the development of a high-power KrF laser system, Ashura, is described. The main amplifier has generated 710 J (95 ns) at the pumping density of 1·lMW/cm3 with the wall plug efficiency of 2·0%. Maximum power of 9·0 GW (200 J/22 ns) per beam has been obtained from the beam lines of six-time pulse multiplexing. Power density of 1 × 1014 W/cm2 has been achieved on target with a 10−6 pre-pulse.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable