Hostname: page-component-7b7567c8c-jswmv Total loading time: 0 Render date: 2026-11-15T20:54:28.175Z Has data issue: false hasContentIssue false

One-dimensional model for a laser-ablated slab under acceleration

Published online by Cambridge University Press:  01 June 2004

J. RAMÍREZ
Affiliation:
E.T.S.I. Aeronáuticos, Universidad Politécnica Madrid, Pl. Cardenal Cisneros, 1, 28040 Madrid, Spain
R. RAMIS
Affiliation:
E.T.S.I. Aeronáuticos, Universidad Politécnica Madrid, Pl. Cardenal Cisneros, 1, 28040 Madrid, Spain
J. SANZ
Affiliation:
E.T.S.I. Aeronáuticos, Universidad Politécnica Madrid, Pl. Cardenal Cisneros, 1, 28040 Madrid, Spain
Get access

Abstract

A one-dimensional model for a laser-ablated slab under acceleration g is developed. A characteristic value gc is found to separate two solutions: Lower g values allow sonic or subsonic flow at the critical surface; for higher g the sonic point approaches closer and closer to the slab surface. A significant reduction in the ablation pressure is found in comparison to the g = 0 case. A simple dependence law between the ablation pressure and the slab acceleration, from the initial value g0 to infinity, is identified. Results compared well with fully hydrodynamic computer simulations with Multi2D code. The model has also been found a key step to produce indefinitely steady numerical solutions to study Rayleigh–Taylor instabilities in heat ablation fronts, and validate other theoretical analysis of the problem.

Information

Type
Research Article
Copyright
© 2004 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable