Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T02:16:43.131Z Has data issue: false hasContentIssue false

Thin shell aerogel fabrication for FIREX-I targets using high viscosity (phloroglucinol carboxylic acid)/formaldehyde solution

Published online by Cambridge University Press:  22 July 2008

H. Yang
Affiliation:
Institute of Laser Engineering, Osaka University, Osaka, Japan
K. Nagai*
Affiliation:
Institute of Laser Engineering, Osaka University, Osaka, Japan
M. Nakai
Affiliation:
Institute of Laser Engineering, Osaka University, Osaka, Japan
T. Norimatsu
Affiliation:
Institute of Laser Engineering, Osaka University, Osaka, Japan
*
Address correspondence and reprint requests to: Keiji Nagai, Institute of Laser Engineering, Osaka University, Yamada Oka 2–6, Suita, Osaka, Japan. E-mail: knagai@ile.osaka-u.ac.jp
Get access

Abstract

Capsules with a thin aerogel shell were prepared by the OO/W/OI emulsion process. (Phloroglucinol carboxylic acid)/formaldehyde (PF) was used as the water phase (W) solution to form the shell of the capsule. PF is a linear polymer prepared from phloroglucinol carboxylic acid. The viscosity of the PF solution can reach a high level of 9×10−5 m2/s without gelation while resorcinol/formaldehyde (RF) gelates at ~3–4×10−5 m2/s. Using the viscous PF solution, capsule with a 17 µm gel shell was fabricated. This thickness satisfies the specification of the first phase of Fast Ignition Realization Experiment (FIREX-I) at Osaka University. When PF gel was extracted to remove the organic solvent, shrinkage of 9% occurred. The final density of the PF aerogel was 145 mg/cm3. Both the shell thickness and density can satisfy the specification of FIREX-I. The pore size of the PF aerogel was less than 100 nm while that of RF was 200–500 nm. The SEM showed that PF had particle-like foam structure while RF had fibrous-like foam structure.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable