Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T00:35:41.823Z Has data issue: false hasContentIssue false

MOCVD Equipment for Recent Developments towards the Blue and Green Solid State Laser

Published online by Cambridge University Press:  13 June 2014

H. Jürgensen
Affiliation:
AIXTRON GmbH
D. Schmitz
Affiliation:
AIXTRON GmbH
G. Strauch
Affiliation:
AIXTRON GmbH
E. Woelk
Affiliation:
AIXTRON GmbH
M. Dauelsberg
Affiliation:
Lehrstuhl für Strömungsmechanik, University of Erlangen-Nürnberg
L. Kadinski
Affiliation:
Lehrstuhl für Strömungsmechanik, University of Erlangen-Nürnberg
Yu.N. Makarov
Affiliation:
Lehrstuhl für Strömungsmechanik, University of Erlangen-Nürnberg

Abstract

For the growth of an electrically pumped lasing nitride emitter, the development of the MOCVD equipment and the process are mutually dependent. Most important is the implementation of the rapid temperature changes that are required between the growth of the different layers of a device structure. Equally important is to provide a reaction chamber that develops a stable gas phase at all growth temperatures used in the process. In this paper we will give insight in the technology and the relationship between processes and equipment. The development of the reation chamber was supported by mathematical modeling that formed the basis for the selection of appropriate process parameters for growth of group-III nitrides. The modeling consists of the numerical solution of the Navier-Stokes equations coupled with heat transfer and mass transport of the chemical species. The modeling of radiative heat transfer takes into account the effect of changing surface radiative properties. These changes result from the coating of the reactor inner surfaces during the growth run. Coupled flow dynamics and chemistry including homogeneous and heterogeneous reactions play an important role for predicting growth rate distributions on the susceptor area. At the practically used high temperatures, group-III metalorganics turn out to be almost entirely decomposed and it is the mass transport of these decomposition products to the growing layer that is assumed to control the growth rate in accordance with experimental observations.

AIXTRON GmbH

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Cross section of Multiwafer Planetary Reactor® for III-N growth

Figure 1

Figure 2a.Streamlines in the planetary Reactor at 1000 mbar

Figure 2

Figure 2b.NH3 concentration profile in the planetary Reactor at 1000 mbar

Figure 3

Figure 3a.Streamlines in the planetary Reactor at 100 mbar

Figure 4

Figure 3b.NH3 concentration profile in the planetary Reactor at 100 mbar

Figure 5

Figure 4.Calculated growth rate distribution in radial direction over susceptor with H2 carrier gas, total flow 20 l/min, TD 1000°C.

Figure 6

Figure 5.Calculated growth rate distribution in radial direction over susceptor with N2 carrier gas, total flow 10 l/min and 2.5l/min (dashed line), TD 1000°C.

Figure 7

Figure 6.Room temperature PL wavelength topography of GaN layer on 2» wafer

Figure 8

Figure 6a.Color histogram.

Figure 9

Figure 7.Room temperature PL FWHM topography of GaN layer on 2»; wafer

Figure 10

Figure 7a.Color histogram.

Figure 11

Figure 8.Room temperature PL intensity topography of GaN layer on 2» wafer

Figure 12

Figure 8a.Color histogram.

Figure 13

Figure 9.Qualitative film thickness distribution map over 2» GaN layer

Figure 14

Figure 9a.Color histogram.

Figure 15

Figure 10.Sheet resistivity map of 2" GaN layer

Figure 16

Figure 11.Room temperature PL wavelength topography of AlGaN layer on 2» wafer

Figure 17

Figure 11a.Color histogram.

Figure 18

Figure 12.Room temperature PL FWHM topography of AlGaN layer on 2» wafer

Figure 19

Figure 12a.Color histogram.