Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T18:43:36.905Z Has data issue: false hasContentIssue false

Modelling dynamic fracture of thin shells filled with fluid: a fully SPH model

Published online by Cambridge University Press:  09 July 2008

Alain Combescure
Affiliation:
LaMCoS UMR CNRS 5259 INSA Lyon, 18–20 allée des sciences, 69621 Villeurbanne, France
Bertrand Maurel
Affiliation:
LaMCoS UMR CNRS 5259 INSA Lyon, 18–20 allée des sciences, 69621 Villeurbanne, FranceÉlectricité de France, Direction des études et recherches, 1 avenue du Général de Gaulle, 92141 Clamart Cedex, France
Serguei Potapov
Affiliation:
Électricité de France, Direction des études et recherches, 1 avenue du Général de Gaulle, 92141 Clamart Cedex, France
Get access

Abstract

This paper is devoted to the description of a new full MLS SPH modelisation of rupture of thin shell filled with fluid and the prediction on consecutive fluid loss though the fracture. The paper first presents an efficient and controlled model for elastoplastic rupture of thin shells by a single layer of SPH balls. The proposed model controls as well static and dynamic instabilities using two basic ingredients: additional stress points to control the hourglass like instabilities and extend the Monhagan viscosity control method to shear and bending components of the generalized efforts. The fluid is modeled using standard SPH fluid model. The interaction is modeled using pin-balls method which is very natural in this type of formulation. Application examples are presented.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences, 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable