Hostname: page-component-74656f9884-j7cmm Total loading time: 0 Render date: 2026-11-09T21:21:24.923Z Has data issue: false hasContentIssue false
  • English
  • Français

Artificial neural networks back propagation algorithm for cutting force components predictions

Published online by Cambridge University Press:  14 February 2014

Issam Hanafi ,
Francisco Mata Cabrera ,
Abdellatif Khamlichi ,
Ignacio Garrido  and
José Tejero Manzanares
Issam Hanafi*
Affiliation:
Ecole Nationale des Sciences Appliquées d’Al Hoceima (ENSAH), BP 03 Ajdir, 32000 Al Hoceima, Morocco
Francisco Mata Cabrera
Affiliation:
University Polytechnic School Of Mining and Industrial Engineering of Almaden, 1 Plaza Manuel Meca, 13400 Almaden, Spain
Abdellatif Khamlichi
Affiliation:
Faculty of Sciences at Tetouan, BP 2121 M’hannech, 93002 Tetouan, Morocco
Ignacio Garrido
Affiliation:
University Polytechnic School Of Mining and Industrial Engineering of Almaden, 1 Plaza Manuel Meca, 13400 Almaden, Spain
José Tejero Manzanares
Affiliation:
University Polytechnic School Of Mining and Industrial Engineering of Almaden, 1 Plaza Manuel Meca, 13400 Almaden, Spain
*
a Corresponding author: hanafi.issam@yahoo.fr

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Reinforced Poly Ether Ether Ketone with 30% of Carbon Fiber (PEEK CF30) offer several thermo-mechanical advantages over standard materials and alloys which make them better candidates in different applications. However, the hard and abrasive nature of the reinforcement fiber is responsible for rapid tool wear and high machining costs. It is very important to find highly effective ways to machine that material. Accordingly, it is important to predict forces when machining fiber matrix composites because this will help to choose perfect tools for machining and ultimately save both money and time. In this study, Artificial Neural Network (ANN) was applied to predict the cutting force components in turning operations of PEEK CF30 using TiN coated cutting tools under dry conditions where the machining parameters are cutting speed ranges, feed rate, and depth of cut. For this study, the experiments have been conducted using full factorial design experiments (DOEs) on CNC turning machine. The results indicated that the well-trained (ANN) model could be able to predict the cutting force components in turning of Carbon Fiber Reinforcement Polymer (CFRP) composites. Complementary results that were not used during derivation of the ANN model have enabled one to assess the validity of the obtained predictions.

Keywords

Neural NetworkmodelingmachiningPEEK CF30TiN coated insertsradial forcecutting forcefeed force

Information

Type
Research Article
Information
Mechanics & Industry , Volume 14 , Issue 6 , 2013 , pp. 431 - 439
Copyright
© AFM, EDP Sciences 2014

References

Cabrera, F.M., Hanafi, I., Khamlichi, A., Jabbouri, A., Bezzazi, M., Sur l’usinabilité des composites à matrices polymères renforcée par des fibres, Mécanique & Industries 11 (2010) 93–103 CrossRefGoogle Scholar
Davim, J.P., Reis, P., Multiple regression analysis (MRA) in modeling milling of glass fibre reinforced plastics (GFRP), Int. J. Manuf. Technol. Manag. 6 (2004) 85–197 Google Scholar
Konig, W., Ch., Wulf, Grab, P., Willerscheid, H., Machining of Fibre Reinforced Plastics, CIRP Ann. 34 (1985) 537–548 CrossRefGoogle Scholar
Cabrera, F.M., Hanafi, I., Khamlichi, A., Jabbouri, A., Bezzazi, M., Prédiction de la force d’usinage lors du chariotage du polyétheré thercétone (PEEK) CF30 en utilisant la méthode de surface de réponse, Can. Aeronaut. Space J. 57 (2011) 1–11 Google Scholar
Hussain, S.A., Pandurangadu, V., Palanikumar, K., Machinability of glass fiber reinforced plastic (GFRP) composite materials, Int. J. Eng. Sci. Technol. 3 (2011) 103-118 CrossRefGoogle Scholar
J.P. Davim, Machining: Fondamentals and recent advances. Springer, London, 2008
Pramanik, A., Zhang, L.C., Arsecularatne, J.A., Prediction of cutting forces in machining of metal matrix composites, Int. J. Machine Tools Manuf. 46 (2006) 1795–1803 CrossRefGoogle Scholar
Venu Gopala Rao, G., Mahajan, P., Bhatnagar, N., Micro-mechanical modeling of machining of FRP composites - Cutting force analysis, Compos. Sci. Technol. 67 (2007) 579–593 Google Scholar
Dabade, U.A., Dapkekar, D., Joshi, S.S., Modeling of chip tool interface friction to predict cutting forces in machining of Al/SiCp composites, Int. J. Machine Tools Manuf. 49 (2009) 690–700 CrossRefGoogle Scholar
Kalla, D., Ahmad, J. Sheikh, Twomeya, J., Prediction of cutting forces in helical end milling fiber reinforced polymers, Int. J. Machine Tools Manuf. 50 (2010) 882–891 CrossRefGoogle Scholar
Sikder, S., Kishawy, H.A., Analytical model for force prediction when machining metal matrix composite, Int. J. Mech. Sci. 59 (2012) 95–103 CrossRefGoogle Scholar
G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium on Ballistics. The Hague. Netherlands, 1983, pp. 541–547
Tsao, C.C., Hocheng, H., Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network, J. Mater Process. Technol. 203 (2008) 342–348 CrossRefGoogle Scholar
Mishra, R., Malik, J., Singh, I., Davim, J.P., Neural network approach for estimating the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates, Mater. Design. 31 (2010) 2790–2795 CrossRefGoogle Scholar
Mata, F., Hanafi, I., Beamud, E., Khamlichi, A., Jabbouri, A., Modelling of machining force components during turning of PEEK CF30 by TiN coated cutting tools using artificial intelligence, Int. J. Machining and Machinability of Materials 11 (2012) 263–279 CrossRefGoogle Scholar
G. Taguchi, Introduction to Quality Engineering. Publisher: Productivity Press Inc. Asian productivity organization, 1990
Sahin, Y., Riza Motorcu, A., Surface roughness model for machining mild steel with coated carbide tool, Mater. Design 26 (2005) 321–326 CrossRefGoogle Scholar
Su, C.T., Wong, J.T., Tsou, S.C., A process parameters determination model by integrating artificial neural network and ant colony optimization, J. Chinese Inst. Industrial Engineers 22 (2005) 346–354 CrossRefGoogle Scholar
Kaneeda, T., CFRP cutting mechanism, Trans. North Am. Manuf. Res. Inst. SME 19 (1991) 216–221 Google Scholar
Alauddin, M., Choudhury, I.A., El Baradie, M.A., Hashmi, M.S.J., Plastics and their machining: A review, J. Mater. Process. Technol. 44 (1995) 40-47 CrossRefGoogle Scholar
Koplev, A., Lystrup, A., Vrom, T., The cutting process, chips, and cutting forces in machining CFRP, Composites 14 (1983) 371–376 CrossRefGoogle Scholar
Wang, D.H., Ramulu, M., Arola, D., Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: Unidirectional laminate, Int. J. Machine Tools Manuf. 35 (1995) 1623–1638 CrossRefGoogle Scholar
Wang, X.M., Zhang, L.C., An experimental investigation into the orthogonal cutting of unidirectional fiber reinforced plastics, Int. J. Machine Tools Manuf. 43 (2003) 1015–1022 CrossRefGoogle Scholar
Hanafi, I., Khamlichi, A., Cabrera, F.M., Almansa, E., Jabbouri, A., Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN Tools, J. Clean. Prod. 33 (2012) 1–9 CrossRefGoogle Scholar
Hanafi, I., Khamlichi, A., Cabrera, F.M., Nuñez López, P.J., Jabbouri, A., Fuzzy rule based predictive model for cutting force in turning of reinforced PEEK composite, Measurement 45 (2012) 1424–1435 CrossRefGoogle Scholar